Construction - Siemens HydroRanger 200 HMI Operating Instructions Manual

11.7

Construction

Enclosure
•
•
Display
Cable
Weight
For watertight applications, use only approved, suitable-sized hubs in the enclosure's
1
conduit holes.
Belden is a registered trademark of Belden Wire & Cable Company.
2
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
Wall mount
Panel mount
240 mm (9.5 inch) x 175 mm (6.9 inch). Width
•
dimension includes hinges.
Type 4X / NEMA 4X / IP65
•
Polycarbonate
•
278 mm (10.93 inch) x 198 mm (7.8 inch),
•
width dimension includes flange.
Type 3 / NEMA 3 / IP54
•
Polycarbonate
•
Backlit HMI LCD display
Using a co-axial cable with the device is NOT
•
recommended. If it is really necessary to use
such cable, see Upgrading, co-axial trans-
ducer extension (Page 354) for instructions.
Split cables: transducer cable to be two cop-
•
per conductors, twisted shielded wire, 300
Vrms,
0.324 ... 0.823 mm (22 ... 18 AWG), nominal
2
capacitance between adjacent conductors @
1 kHz = 62.3 pF/m (19 pF/ft), nominal capaci-
tance between conductor and shield @ 1 kHz
= 108.3 pF/m (33 pF/ft) (Belden
ceptable).
mA output cable to be two copper conductors,
•
twisted shielded wire, 300 Vrms,
0.324 ... 0.823 mm (22 ... 18 AWG), nominal
2
capacitance between adjacent conductors @
1 kHz = 62.3 pF/m (19 pF/ft), nominal capaci-
tance between conductor and shield @ 1 kHz
= 108.3 pF/m (33 pF/ft) (Belden
ceptable).
365 m maximum
•
Wall mount: 1.22 kg (2.68 lb)
•
Panel mount: 1.35 kg (2.97 lb)
•
Technical data
11.7 Construction
1
8760 is ac-
2
8760 is ac-
2
299