Siemens HydroRanger 200 HMI Operating Instructions Manual page 258

Parameter reference
8.7 Maintenance and Diagnostics (3.)
Reading (3.2.8.2.)
Corresponds to the final reading after all programming is applied.
Index
Values
In general, this means that: Reading (3.2.8.2.) = [Reading x Convert Reading (2.12.5.)
(Page 238)] + Offset Reading (2.12.6.) (Page 238).
Reading measurements by operation:
Sensor mode
OFF
Level
Space
Distance
Difference
Average
OCM
Pump totalizer
Level (3.2.8.3.)
Shows the distance in Units (2.1.1.) (Page 162) between Empty (2.2.4.) (Page 170) and the
monitored surface.
Index
Values
Related
Distance % (3.2.8.4.)
Shows the distance between the surface and the transducer face (displays only as % of
Empty).
Index
Values
Related
Use Distance (3.2.8.12.) (Page 258) unless the distance information is required in percent.
256
Level
Range: -999 ... 9999
Vessel shape=0
----
Level (3.2.8.3.) (Page 256)
Space (3.2.8.11.) (Page 258)
Distance (%) (3.2.8.4.)
(Page 256)
Level (3.2.8.3.) (Page 256)
Level (3.2.8.3.) (Page 256)
Flow (3.2.8.14.) (Page 259)
Head (3.2.8.13.) (Page 258)
Level
Range: -999 ... 9999
Units (2.1.1.) (Page 162)
•
Empty (2.2.4.) (Page 170)
•
Span (2.2.2.) (Page 169)
•
Level
Range: 0.000 ... 9999% (Displays as % of Empty; Read only)
Units (2.1.1.) (Page 162)
•
Empty (2.2.4.) (Page 170)
•
Vessel shape≠0
----
Head (3.2.8.13.) (Page 258)
100% minus Head (3.2.8.13.)
(Page 258)
Distance (%) (3.2.8.4.)
(Page 256)
Level (3.2.8.3.) (Page 256)
Level (3.2.8.3.) (Page 256)
Flow (3.2.8.14.) (Page 259)
Head (3.2.8.13.) (Page 258)
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC