Echo Quality (3.2.11.) - Siemens HydroRanger 200 HMI Operating Instructions Manual

Parameter reference
8.7 Maintenance and Diagnostics (3.)
TS-3 temperature minimum (3.2.10.5.)
Shows the lowest temperature encountered, as measured by the TS-3 Temperature Sensor
(if applicable).
Index
Values
Related
To reset the log after an open circuit on the transducer wiring, enter the value 150.
8.7.2.11

Echo quality (3.2.11.)

Transducer selector (3.2.11.1.)
Sets the transducer index for all parameters applicable to this sub-menu.
Long confidence (3.2.11.2.)
Displays the Long Echo Confidence of the measurement echo from the last shot.
Index
Values
Related
Use this feature to monitor the effect of transducer aiming, location, and mechanical
transducer/mounting isolation.
Short confidence (3.2.11.3.)
Displays the Short Echo Confidence of the measurement echo from the last shot.
Index
Values
Related
Use this feature to monitor the effect of transducer aiming, location, and mechanical
transducer/mounting isolation.
262
Global
Range: - 50 ... 150 °C (Read only)
Preset: 150 °C
TS-3 temperature maximum (3.2.10.4.) (Page 261)
Transducer
Range: 0 ... 99
Long echo threshold (2.11.2.3.) (Page 223)
•
TVT type (2.11.3.6.) (Page 230)
•
Transducer
Range: 0 ... 99
Long echo threshold (2.11.2.3.) (Page 223)
•
TVT type (2.11.3.6.) (Page 230)
•
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC