Siemens HydroRanger 200 HMI Operating Instructions Manual page 259

Volume (3.2.8.5.)
Shows the calculated volume of material.
Index
Values
Related
Rate (3.2.8.6.)
Shows the rate of material level change in Units (2.1.1) (Page 162) per minute.
Index
Values
Altered by
Related
A negative rate indicates the vessel is emptying.
Volume rate (3.2.8.7.)
Shows the rate of change of volume in percent of maximum volume per minute.
Index
Values
Related
This value is used internally to calculate inflow in pumped volume applications
[Inflow/discharge Adjust (2.7.7.) (Page 189) = Based on Rate Estimation].
Reading maximum (3.2.8.8.)
Shows the highest reading calculated (in normal Reading units).
Index
Values
Related
To reset the values once the installation is working correctly, enter the value 0.0.
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
Level
Range: -999 ... 9999
Maximum volume (2.7.3.) (Page 188)
•
Single-point model
Global
Range: -999 ... 9999 (Read only)
Rate filter (2.3.5.) (Page 175)
Units (2.1.1.) (Page 162)
•
Span (2.2.2.) (Page 169)
•
Single-point model
Global
Range: -999 ... 9999 (Read only)
Inflow/discharge adjust (2.7.7.) (Page 189)
Level
Range: -999 ... 9999 (read only)
Reading minimum (3.2.8.9.) (Page 258)
•
Parameter reference
8.7 Maintenance and Diagnostics (3.)
Dual-point model
Transducer
Dual-point model
Transducer
257