Table of Contents
Advertisement
Mounting the enclosure
1. Remove the lid screws and open the lid to reveal the mounting screw holes.
2. Mark and drill four holes in the mounting surface for the four screws (customer supplied).
3. Fasten with a long screwdriver.
①
Note
It is recommended to mount directly to wall or to electrical cabinet back panel with mounting
screws: #6. If alternate mounting surface is used, it MUST be able to support four times the
weight of the unit.
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
Mounting screw holes
Installing/mounting
4.2 Mounting Instructions
31
Advertisement
Table of Contents
Troubleshooting
