Table of Contents
Advertisement
Parameter reference
The device is configured through its parameters, and the application determines the
parameter values which are entered into the unit. Please check your value entries carefully
before operating the device to ensure optimum performance.
8.1
Key terms
In the following parameter tables, please note these key terms:
● Default - the factory-set value or option; indicated with an asterisk (*) or specified as a
preset value.
● Global - pertains to values that are common for all inputs and outputs on the unit.
● Index - when parameters apply to more than one input, they are indexed. The index
selector value defines the input/output for that parameter. For example, index relates to
transducer inputs or mA outputs, and can also refer to relays, communications ports, and
other parameters.
Note
• Parameter range values are displayed in the default of the defined unit of measure. For
example, if a parameter description states that it is "defined in Units", the range for that
parameter will be shown in meters [as meters (m) is the default for Units].
• The number of decimals displayed for a parameter value will depend on the unit of
measure, unless decimal places can be set by the user [such as, Totalizers - Totalizer
Decimal Position (2.14.4.) (Page 251) ].
• To enter Program mode using the local push buttons, press
Measurement mode.
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
8
. Press to
to return to
155
Advertisement
Table of Contents
Troubleshooting
