Safety Notes - Siemens HydroRanger 200 HMI Operating Instructions Manual

Safety notes

This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications
relevant to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state.
Symbol
Observe the safety rules, provisions and laws applicable in your country during connection,
assembly and operation. These include, for example:
● National Electrical Code (NEC - NFPA 70) (USA)
● Canadian Electrical Code (CEC) (Canada)
Further provisions for hazardous area applications are for example:
● IEC 60079-14 (international)
● EN 60079-14 (EU)
The CE marking on the device symbolizes the conformity with the following European
directives:
Electromagnetic compatibil-
ity EMC
2014/30/EU
Low voltage directive LVD
2014/35/EU
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
Explanation
Consult operating instructions
Hot surface
Dangerous electrical voltage
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to elec-
tromagnetic compatibility
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of electrical equipment de-
signed for use within certain voltage limits
2
19