Siemens HydroRanger 200 HMI Operating Instructions Manual page 22

Safety notes
Pressure equipment di-
rective PED
2014/68/EU
Measuring instruments di-
rective MID
2014/32/EU
The applicable directives can be found in the EU declaration of conformity of the specific
device.
Improper device modifications
Risk to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
• Only carry out modifications that are described in the instructions for the device. Failure
Due to the large number of possible applications, each detail of the described device
versions for each possible scenario during commissioning, operation, maintenance or
operation in systems cannot be considered in the instructions. If you need additional
information not covered by these instructions, contact your local Siemens office or company
representative.
Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens representative or our application
department before you operate the device under special ambient conditions as can be
encountered in nuclear power plants or when the device is used for research and
development purposes.
Use in hazardous area
Risk of explosion.
• Only use equipment that is approved for use in the intended hazardous area and
• Don't use devices that have been operated outside the conditions secified for hazardous
20
WARNING
to observe this requirement cancels the manufacturer's warranty and the product
approvals.
WARNING
labelled accordingly.
areas. If you have used the device outside the conditions for hazardous areas
permanently make all Ex markings unrecognizable on the nameplate.
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of pressure equipment
Directive of the European Parliament and the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of measuring instruments
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC