Order Number (3.1.4.); Serial Number (3.1.5.); Hardware Revision (3.1.6.); Firmware Revision (3.1.7.) - Siemens HydroRanger 200 HMI Operating Instructions Manual

8.7.1.4

Order number (3.1.4.)

8.7.1.5

Serial number (3.1.5.)

Shows the unique factory-set serial number of the device. Read only.
8.7.1.6

Hardware revision (3.1.6.)

Shows to the electronics hardware of the device. Read only.
8.7.1.7

Firmware revision (3.1.7.)

Shows the sensor firmware revision value. Read only.
8.7.1.8

Loader revision (3.1.8.)

Shows the software revision value used to update the device. Read only.
8.7.1.9

Manufacture date (3.1.9.)

Displays the manufacture date of this unit. Read only.
Index
Values
Related
8.7.1.10

Date last configured (3.1.10.)

Shows the date when the device was last configured by SIMATIC PDM. Read only.
8.7.2

Diagnostics (3.2.)

8.7.2.1

Transducer selector (3.2.1.)

Sets the transducer index for all parameters applicable to this sub-menu.
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
8.7 Maintenance and Diagnostics (3.)
Global
Format: YY:MM:DD (Read only)
Power-ON resets (3.2.4.) (Page 255)
Parameter reference
253