Siemens HydroRanger 200 HMI Operating Instructions Manual page 196

Parameter reference
8.6 Setup (2.)
Level source (2.8.1.2.)
Sets the level source for the indexed relay.
Index
Options
Altered by
Preset applications (2.8.1.3.)
Selects the preset options to configure or bench test the unit.
Index
Options
Alters
Related
Note
• For detailed descriptions of the various preset applications, see Preset applications
(Page 100).
• Before selecting a Preset Application, a Level, Volume or Flow Quick Start Wizard must
first be completed.
Select an application that is similar to yours and change the parameters required. If nothing
suits your application, refer to Relay function (2.8.1.4.) (Page 195).
194
Relays
*Transducer 1
Transducer 2
Difference or Average
Response rate (2.3.4.) (Page 174)
•
Fill rate/minute (2.3.2.) (Page 173)
•
Empty rate/minute (2.3.3.) (Page 173)
•
LOE timer (2.4.2.) (Page 177)
•
Material level (2.4.5.) (Page 178)
•
Global
*OFF
Wet well 1
Wet well 2
Reservoir 1
Reservoir 2
Screen
Alarms
Level source (2.8.1.2.) (Page 194)
•
Relay function (2.8.1.4.) (Page 195)
•
ON setpoint (2.8.1.5.) (Page 197)
•
OFF setpoint (2.8.1.6.) (Page 197)
•
Pump by rate (2.8.1.8.) (Page 198)
•
Sensor mode (2.1.3.) (Page 163)
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC