Siemens HydroRanger 200 HMI Operating Instructions Manual page 76

Commissioning
6.5 Quick Start Wizards
Start of Quick Start Flow wizard
Shows the type of Wizard to be executed.
Options
Measurement point selector
Selects the measurement points to configure.
Note
This is available on the dual-point model only.
Options
Transducer
Specifies the model of the Siemens transducer connected to the device.
Index
Options
74
CANCEL
START
Point 1
Point 2
Single-point model
Global
*No transducer (dual-point preset)
ST-25
ST-50
STH
XCT-8
*XPS-10 (single-point preset)
XCT-12
XPS-15
XRS-5
mA input
Dual-point model
Transducer
Operating Instructions, 06/2018, A5E36281317-AC
HydroRanger 200 HMI