6.4.4
Key functions in Edit mode
Key
6.5
Quick Start Wizards
Wizards provide step-by-step Quick Start (QS) procedures that configure the device for
simple applications. To configure the device for applications of Level, Volume (standard
vessel shapes), or Flow, see Setting wizards via graphical display (Page 60).
Wizards for applications employing more complex vessel shapes are available via SIMATIC
PDM. For more details, see SIMATIC Process Device Manager (PDM) (Page 327).
Before initiating a Quick Start Wizard to configure the device, you may wish to gather the
necessary parameter values. Parameter Configuration Charts that list all parameters and
available options for each application type are available at
www.siemens.com/processautomation
(https://www.industry.siemens.com/topics/global/en/process-automation/pages/default.aspx).
You can record data and select from options on the chart that apply to your application, then
with this data on hand, complete the Setting wizards via graphical display (Page 60) below,
or via another Quick Start Wizard, as referenced above.
HydroRanger 200 HMI
Operating Instructions, 06/2018, A5E36281317-AC
Name
UP or
Selecting op-
DOWN
tions
arrow
Alpha-numeric
editing
RIGHT
Selecting op-
arrow
tions
Numeric edit-
ing
LEFT arrow
Selecting op-
tions
Numeric edit-
ing
6.5 Quick Start Wizards
Function
Scrolls to item
increments or decrements digits
•
toggles plus and minus sign
•
Accepts the data (writes the parameter)
•
Changes from Edit to Navigation mode
•
Moves cursor one space to the right
•
or, with selection highlighted, accepts the
•
data and changes from Edit to Navigation
mode
Cancels Edit mode without changing the pa-
rameter
Moves cursor to plus/minus sign if this is
•
the first key pressed
or, moves cursor one space to the left
•
or, with cursor on Enter sign, cancels the
•
entry
Commissioning
59