A Diagnostic Messages - Festo CiA 402 Manual

A Diagnostic messages
A Diagnostic messages
A.1 Explanations on the diagnostic messages
The following table summarises the significance of the diagnostic messages and the actions to be
taken in response to them:
Terms Meaning
No. Main index (error group) and sub-index of the diagnostic message.
Indication via the 7-segments display, in FCT or in the diagnostic memory via
FHPP.
Code The Code column includes the error code (Hex) via CiA 301.
Message Message that is displayed in the FCT.
Cause Possible causes for the message.
Action Action by the user.
Reaction The Reaction column includes the error response (default setting, partially con-
figurable):
– PS off (block output stage),
– QStop (fast stop with parameterised ramp),
– Warn (warning),
– Ignore.
Tab. A.1 Explanations on the diagnostic messages
For a complete list of the diagnostic messages that correspond to the firmware versions used at the
time of printing this document, please refer to section A.2.
Under section A.3, you will find the error codes in accordance with CiA301/402 and the error bit num-
bers with assignment to the error numbers of the diagnostic messages.
Festo – GDCP-CMMS/D-C-CO-EN – 1404NH – English 141