Fieldbus Interface - Festo CiA 402 Manual

1

Fieldbus interface

1 Fieldbus interface
Control and parameterisation via CiA 402 is supported by the CMMS-AS/CMMD-AS/CMMS-ST via the
fieldbus interface corresponding to Tab. 1.1. The CANopen interface is integrated in the motor control-
ler. The fieldbus is configured with the DIL switches [S1].
Fieldbus
CAN bus
Tab. 1.1 Fieldbus interface for CiA 402
1
2
3
1
Bus/CAN LED
2
DIL switch [S1] for fieldbus settings
Fig. 1.1 Motor controller CMMS-AS/CMMD-AS/CMMS-ST
Festo – GDCP-CMMS/D-C-CO-EN – 1404NH – English
Interface
[X4] – integrated
1
2
3
Description
Chapter 2
3
CANopen interface [X4]
1
2
3
9