Diagnostics Via Status Bits Or The I/O Diagnostic Interface; Error Numbers - Festo MSE6-E2M Operating Instruction

Malfunctions
Module common error LED
LED Sequence
red light
off
Tab. 60: Module common error LED
10.1.2

Diagnostics via status bits or the I/O diagnostic interface

Detailed information on the diagnostics with status bits or the I/O diagnostics interface can be found
in the CPX system description è 1 Applicable documents.
The MSE6-E2M offers the following two modes for diagnostics:
Diagnostics mode
Status bits, system status
I/O diagnostics interface, system diagnostics
Tab. 61: Network-independent diagnostic modes
10.2

Error numbers

Possible errors of the energy efficiency module are divided into three error classes with different
priorities depending on the seriousness of the error. If an error occurs, the system error SF LED will
flash depending on the error class.
74
Meaning
Module common error
No error
Action
Description of the error numbers
è 10.2 Error numbers.
–
Description
The status bits are used to display group diag-
nostic messages, global error messages. Access
to the status bits is via 8 internal inputs.
The I/O diagnostics interface is a network-inde-
pendent diagnostics interface. It can be used to
read out all the internal data and parameters via
16 internal inputs and outputs.
All diagnostic information is then also available
even if the network protocol used does not offer
extensive diagnostic functions.
Festo — MSE6-E2M — 2022-08d