3-1 Internal Boards
3-1-3 Internal Board of the CA-530
The internal board of the CA-530 on which switches
and controls used for system setup are provided, is
introduced here.
VSE
DVP DC
VSE board
Detaching an internal board
Loosen the four screws on the panel, and remove the
side panel. Then pull out an internal board with the
black knob.
The internal board in the CA-550/550P are detached in
the same way.
D C
D V P
V S E
Knobs
3-8
Chapter 3 Initial Settings
VSE board
8
7
6
5
4
A
B
C
RV201
D
E
F
G
H
J
K
S1
L
M
1 RV201 (earphone level) control
Adjusts the eaphone signal level as required.
2 S1 switch
S1-1: Selects a signal output from the MONITOR
connector.
MONITOR: Supplies a VF video signal set on the
Menu of the BVP-950/950P
VBS: Supplies a composite video signal.
Factory setting: MONITOR
S1-2: Selects a signal output from the EARPHONE
jack.
ON: Supplies a microphone signal.
OFF: Supplies an audio monitor signal.
Factory setting: OFF
3
2
1
1 RV201 control
2 S1 switch