Sony BVP-900 Series System Manual page 360

To adjust the skin detail width
Adjustment procedure
1
Set the cursor to "Width" by turning the MENU
SELECT knob.
2
Press the MENU SELECT switch toward ENTER.
The figure starts blinking.
3
Adjust the width with the MENU SELECT knob.
4
Press the MENU SELECT switch toward ENTER.
The figure stops blinking and the adjustment is
completed.
To turn on/off the skin tone detail function
Operating procedure
1
Set the cursor to "Skin Detail" by turning the
MENU SELECT knob.
The current status (ON or OFF) starts blinking.
2
Press the MENU SELECT switch toward ENTER
for the desired status.
Each press on the switch selects ON or OFF in turn.
To turn on/off the skin tone detail gate
function
Operating procedure
1
Set the cursor to "Skin Detail Gate" by turning the
MENU SELECT knob.
The current status (ON or OFF) starts blinking.
2
Press the MENU SELECT switch toward ENTER
for the desired status.
Each press on the switch selects ON or OFF in turn.
When the adjustments are completed
Press the MENU SELECT switch toward CANCEL to
return to the Operation menu.
7-2-4 Adjustments With the
Painting Menu
By pressing the MENU SELECT switch toward
ENTER with the cursor set at "Painting" on the
Operation menu (page 7-2), the Painting menu
appears.
Painting menu
* Painting *
Black : 0
Detail : 0
Gamma : 0
Knee : 0
The following operations can be performed with the
Painting menu.
• Adjustment of the black
• Adjustment of the detail level
• Adjustment of the gamma
• Adjustment of the knee
To adjust the black
Adjustment procedure
1
Set the cursor to "Black" by turning the MENU
SELECT knob.
2
Press the MENU SELECT switch toward ENTER.
The figure starts blinking.
3
Adjust the level with the MENU SELECT knob.
4
Press the MENU SELECT switch toward ENTER.
The figure stops blinking and the adjustment is
completed.
To adjust the detail level
Adjustment procedure
1
Set the cursor to "Detail" by turning the MENU
SELECT knob.
2
Press the MENU SELECT switch toward ENTER.
The figure starts blinking.
Chapter 7 Stand-Alone Operations of Cameras, etc.
(Continued)
7-5