Sony BVP-900 Series System Manual page 345

6-4 Character Display of the CCU-700A/700AP/550A/550AP
Self-diagnostics of the camera system
The results of the self-diagnosis of the camera system
are displayed in three pages. When the camera setting
status is displayed and you press the CHARACTER
button, page 1 of the self-diagnostics appears. Press
the CHARACTER button again and the page changes.
Page 1 of the self-diagnosis
Sys tem
*
TRIAX Cab l
Comp.
S t ep
T imer
Page 2 of the self-diagnosis
Sys tem
*
CAMERA
RCP /CNU
PAN EL
Page 3 of the self-diagnosis
The results of the self-diagnosis for each function
are displayed.
Sys t em
*
I n t e rco m
CAMERA
CAMERA MI C
CH1 60dB
CH2 40dB
..........................................................................................................................................................................................................
1) For these items, when an error occurs, the board name is
displayed, such as "DM NG." Press the CHARACTER
6-22
Chapter 6 Display
D i ag 1 / 3
*
e Connec t Connection of a triax cable (connect/open)
Aut o
Selection of cable compensation of a triax cable (auto/manual)
2
Cable length of a triax cable (step indication in the circuit)
0H
Elapsed time on the AT board
D i ag 2 / 3
Connection of a camera cable (connect/short)
*
Data from the camera
Cab l e Connec t
Da t a OK
Status of the power of the camera
Power ON
Status of the distinguishing tone of the camera
Tone OK
Cab l e Connec t
Connection of a cable to the RCP/CNU connector
Da t a OK
Data from the RCP/CNU connector
Power OK
Da t a OK
Power at the RCP/CNU connector
Data from the BKP-5973 control panel
D i ag 3 / 3
*
Line of Intercom 1 and 2 of the camera (producer/engineer)
CH1 PROD
MI C Of f
Microphone status of Intercom 1 and 2 of the camera
Ga i n
Remo t e Gain and control of the microphone circuit of the camera
Loca l
1)
1)
1)
1)
1)
1)
1)
button on the RCP-700-series unit and the status of the
board on which the error has occurred appears.