Sony BVP-900 Series System Manual page 242

To adjust from the RCP-700-series
Notes
• When the flare function is turned off from the MSU-
700A/750, the picture does not change even when
you change the flare setting. It will become effective
when you turn on the flare function.
• The flare compensation has no effect on the test
signals.
To adjust from the RCP-740/741
KNEE POINT KNEE SLOPE
SATURATION CONTRAST
SKIN DETAIL SKIN PHASE SKIN WIDTH
R GAMMA M GAMMA B GAMMA
R FLARE G FLARE B FRARE
DTL LEVEL DTL LIMITER BLK LIMITER
2
1
Press either 4 or $ button to light the indicators of
the second lowest line.
2
Adjust the flare balance with the left three control
knobs (R, G, and B).
The LED level markers around the controls light to
indicate the adjusted volume.
To adjust from the RCP-730/731
<
W h
R
2
1
WHITE BLACK GAMMA FLARE
DETAIL SKIN SKIN
DTL-1 DTL-2
CLEAR
SKIN SAT
BLK GAMMA
1
DTL CRISP
PAINT
LOCK
>
i t e
G B
KNEE / KNEE KNEE
WHT CLIP POINT SLOPE
BLK GAMMA MONO COLOR
/ SAT COLOR CORRECTOR
1
Press the FLARE button of the paint control block.
The LCD display serves flare adjustments.
2
Adjust the R, G, and B with the three controls.
The LED level markers around the controls light to
indicate the adjusted volume.
To adjust from the RCP-720/721
ABSOLUTE
WHITE
BLACK/FLARE
2
1
Press and light the FLARE button.
2
Adjust the R, G, and B with the BLACK/FLARE
controls.
(From the left, the controls are for R, G, and B.)
BLK GAMMA
DETAIL
1
FLARE
4-63
Chapter 4 Adjustments