Sony BVP-900 Series System Manual page 253

4-10 Detail Adjustments
Fine detail
The fine detail function provides finer detail
compensation without changing the peak. This is valid
only for H detail.
Fine detail Off
All these items can be adjusted on the menu operation
block of the MSU-700A/750.
On the RCP-740/741 detail level, detail limiter, black
limiter, and detail crispening can be adjusted. On the
RCP-730/731, the detail level, detail limiter, and level
dependence can be adjusted. When using the RCP-
720/721, only the detail level with the DETAIL
control.
To turn off the detail function
When using the MSU-700A, you can turn off the detail
function and level dependence function, if required,
with a button or menu operation.
Press and light the DETAIL OFF button to turn off the
detail function.
When you use the detail function, check that the
DETAIL OFF button is dark.
DETAIL OFF button
LVL DEP OFF button
KNEE DETAIL LVLDEP GAMMA CHROMA
OFF OFF OFF OFF
KNEE KNEE
APERTURE SAT
5600K AUTO SKIN DETAIL SATURATION CONTRAST
KNEE DETAIL GATE
When the DETAIL OFF button is not lit (Detail ON),
you can turn off only the level dependence function by
pressing and lighting the LVL DEP OFF button.
You can also turn on and off thethe detail function and
level dependence function on the adjustment display of
the paint menu of the MSU-700A/750 or using the
Function menu of the MSU-750.
The detail function can also be turned off by pressing
and lighting the DTL OFF button of the RCP-730/731.
For the Function menu of the MSU-750, see page 4-31.
4-74
Chapter 4 Adjustments
Fine detail On
MATRIX
OFF OFF
MONO COLOR
COLOR CORRECT
BLACK CHARACTER
GAMMA
Knee aperture function
When using the MSU-700A, you can turn on/off the
knee aperture function, which increases the detail level
in the horizontal direction for signals which exceeds
the knee point to emphasize the detail of the highlight.
To turn on this function, press and light the KNEE
APERTURE button.
KNEE APERTURE button
KNEE DETAIL LVLDEP GAMMA
OFF OFF OFF OFF
KNEE KNEE
APERTURE SAT
5600K AUTO SKIN DETAIL
KNEE DETAIL GATE
With the MSU-700A/750, you can turn on and off the
knee aperture on the adjustment display of the PAINT
menu.
With the MSU-750, you can also turn it on and off by
pressing [Knee Aperture] on page 1 by selecting [SW]
on the Function menu.
For the Function menu of the MSU-750, see page 4-31.
CHROMA MATRIX
OFF OFF
MONO COLOR
COLOR CORRECT
SATURATION CONTRAST BLACK CHARACTER
GAMMA