Sony BVP-900 Series System Manual page 361

7-2 Adjustments on the BVP-900/900P
3
Adjust the level with the MENU SELECT knob.
4
Press the MENU SELECT switch toward ENTER.
The figure stops blinking and the adjustment is
completed.
To adjust the gamma
Adjustment procedure
1
Set the cursor to "Gamma" by turning the MENU
SELECT knob.
2
Press the MENU SELECT switch toward ENTER.
The figure starts blinking.
3
Adjust the level with the MENU SELECT knob.
4
Press the MENU SELECT switch toward ENTER.
The figure stops blinking and the adjustment is
completed.
To adjust the knee
Adjustment procedure
1
Set the cursor to "Knee" by turning the MENU
SELECT knob.
2
Press the MENU SELECT switch toward ENTER.
The figure starts blinking.
3
Adjust the width with the MENU SELECT knob.
4
Press the MENU SELECT switch toward ENTER.
The figure stops blinking and the adjustment is
completed.
When the adjustments are completed
Press the MENU SELECT switch toward CANCEL to
return to the Operation menu.
7-6
Chapter 7 Stand-Alone Operations of Cameras, etc.
7-2-5 Adjustments With the File
Control Menu
By pressing the MENU SELECT switch toward
ENTER with the cursor set at "File control" on the
Operation menu (page 7-2), the File Control menu
appears.
File Control menu
* File Control *
Scene file : none
Standard
Auto setup
The following operations can be performed with the
File Control menu.
• Retrieving and canceling scene files
• Retrieving the standard settings
• Auto Level Setup
To retrieve scene files
Operating procedure
1
Set the cursor to "Scene" file by turning the MENU
SELECT knob.
2
Press the MENU SELECT switch toward ENTER.
The number or "none" starts blinking.
3
Select the desired scene file number with the
MENU SELECT knob.
4
Press the MENU SELECT switch toward ENTER.
The number stops blinking and the corresponding
scene file is retrieved.
To cancel the scene file
Select "none" in Step 3 above.
When you press the MENU SELECT switch, the scene
file is canceled.