Attaching The Ca-530/570/570P/950/950P - Sony BVP-E10 Series Operation Manual

Attaching the CA-530/570/570P/950/
950P
If you attach the CA-530/570/570P/950/950P Camera
Adaptor to the camera, a portable VTR, camera control
unit or AC adaptor can be connected to the camera.
Attaching procedure
1
Attach the CA-530/570/570P/950/950P to the back of
the camera.
Hook the upper part then push the lower part securely
in place. Then make sure the camera adaptor is firmly
attached to the camera.
2
Tighten the CA lock screw to secure the adaptor.
Removing the CA
Turn the CA lock screw counterclockwise until it idles and
then remove the camera adaptor while holding the screw
pushed in.
16
Setting Up the Camera
CA lock screw
Attaching a shoulder strap
Attach a shoulder strap as shown below.
Clip
Pull up on the strap to
lock it.
Detaching a shoulder strap
Shoulder strap post
Press here to release.