White Adjustments; Selecting The Filters - Sony BVP-900 Series System Manual

4-6 White Adjustments

4-6-1 Selecting the Filters

To obtain the optimum depth of field according to the
color temperature or brightness of lighting equipment,
the BVP-900-series video camera is equipped with five
each of the ND filters and CC (Color temperature
Conversion) filters.
The filters can be selected by specifying the
corresponding numerics or alphabets on either the video
camera, MSU-700A/750, or RCP-720/721/740/741.
Numeric ND filter
1 Clear
1
2 / ND
4
1
3 / ND
8
1
4 / ND
16
1
5 / ND
64
Selecting 5600K
If you use a CC filter at a place where the color
temperature is high, such as in a shadow around
sunset, the iris may open too much. In such a case you
can set the reference color temperature of the camera
to 5600K.
To set to 5600K, press the 5600K button of the MSU-
700A/750 or RCP-720/721/730/731/740/741.
Examples
KNEE DETAIL LVLDEP GAMMA
OFF OFF OFF OFF
KNEE KNEE
APERTURE SAT
5600K AUTO SKIN DETAIL
KNEE DETAIL GATE
5600K AUTO SKIN DETAIL
KNEE DETAIL GATE SATURATION
5600K button
With the MSU-750, you can turn it on and off by
pressing [5600K] on page 1 by selecting [SW] on the
Function menu.
For the Function menu of the MSU-750, see page 4-31.
4-46
Chapter 4 Adjustments
Alphabet CC filter
A Cross filter
B 3200K
C 4300K
D 6300K
E 8000K
MSU-700A
CHROMA MATRIX
OFF OFF
MONO COLOR
COLOR CORRECT
SATURATION CONTRAST BLACK CHARACTER
GAMMA
RCP-740/741
CONTRAST BLACK CHARACTER
GAMMA
To select the filters on the BVP-900/900P
Proceed as follows.
BVP-900/900P rear panel
R G B
POWER
2 3 4
FILTER LOCAL H-POSI V-POSI
1
1 5
ND
WIDTH HEIGHT
B C D
2
A E
CC
CENTER SAFETY
ZONE UP TALLY MIX VF DISPLAY MENU SELECT
MARKER
ON ON ON ON
ON
OFF
CANCEL ENTER
OFF OFF OFF OFF MENU
1
Press and light the FILTER LOCAL button.
2
Set the ND filter selector (left) and CC filter
selector (right) to the desired filter positions.
The ND and CC buttons for the selected filter on
the MSU-700A and RCP-740/741 light.
On the MSU-750 and RCP-720/721/730/731, the
number or alphabet for the selected filter appears
on the FILTER display.
To select the filters on the BVP-950/950P
BVP-950/950P side panel
FILTER
LOCAL button
ND filter button
FILTER
LOCAL
CC filter button
While holding the FILTER LOCAL button depressd,
select the desired filter combination by pressing the
ND or CC button.
When the camera is installed in the CA-905, you can
select the filters on the rear control panel of the CA-
905 in the manner as with the BVP-900/900P.
The ND and CC buttons for the selected filter on the
MSU-700A and RCP-740/741 light.
On the MSU-750 and RCP-720/721/730/731, the
number or alphabet for the selected filter appears on
the FILTER display.
RET RET 1
RETURN
1
SELECT
2 3
1
4
STORE
CURSOR
1 2 3 ON
VF DETAIL PinP
ON POSITION
CALL
ON
OFF OFF
ND CC