Sony BVP-900 Series System Manual page 322

Sending the scene files from one camera to other multiple cameras
To send the scene files from one camera to other
multiple cameras, proceed as follows.
No IC memory card is necessary for this operation.
1
Press [CAM->CAMs] to set it in inverse video.
The camera select buttons and the message "Select
source camera" appear.
2
Use the camera select buttons to select the source
cameras to set it in inverse video (for example, as
with 13 in the figure).
3
Press [Enter].
The message "Select destination camera" appears.
4
Press the camera select buttons to select the
destination cameras to set them in a shaded
background (for example, as with 15, 16, 18 and
19 in the figure).
5
When selection of the destination cameras is
completed, press [Enter].
The message "Load OK?" appears to confirm the
operation.
6
Press [Enter] again.
(To cancel, press [CAM->CAMs] [now in inverse
video].)
When you press [Enter], transfer of the scene files
from the source camera to the destination cameras
begins.
During transfer, the message "Now loading" is
displayed.
13 Scene Transfer
CAM-> CARD-> CARD-> CAM->
CARD CAM CAMs CAMs
13 14 15 16 17 18
19 20 21 22 23 24
Select source camera:
CAM CAMs
Example: To send from Camera 13
13 Scene Transfer
CAM-> CARD-> CARD-> CAM->
CARD CAM CAMs CAMs
13 14 15 16 17 18
19 20 21 22 23 24
Select destination camera:
CAM CAMs
Example: To send to Cameras 15, 16, 18 and 19
13 Scene Transfer
CAM-> CARD-> CARD-> CAM->
CARD CAM CAMs CAMs
13 14 15 16 17 18
19 20 21 22 23 24
Load OK ?
CAM CAMs
Chapter 5 File Operations
Exit
Delete
Enter
Exit
Delete
Enter
Exit
Delete
Enter
(Continued)
5-37