Sony BVP-900 Series System Manual page 314

To save the reference file to a card
To save the reference file in a camera to a memory
card, proceed as follows.
For the storing operation of the reference file, see "5-2
Storing the Reference File."
1
Using the camera select buttons, select the camera
in which the reference file to be saved has been
stored.
The selected camera number is displayed on the
upper left of the menu.
2
Press [CAM->CARD] to set it in inverse video.
13 Ref. Transfer
CAM-> CARD-> CARD->
CARD CAM
Date
95/06/13
Save OK ?
CAM
The message "Save OK?" appears to confirm the
operation.
3
Press [Enter] (To cancel, press [CAM->CARD]
[now in inverse video]).
When you press [Enter], transfer of the reference
file from the specified camera to the card begins.
During transfer, the message "Now saving" is
displayed.
When the saving is completed
The message "Completed" is displayed, and the
previous display is resumed.
If the saving fails, an error message is displayed.
Exit
CAM->
CAMs CAMs
Time
15:28
BV9x
Enter
CARD
To load the reference file from a card
To load the reference file from a memory card to a
camera, proceed as follows.
1
Using the camera select buttons, select the camera
in which the reference file is to be loaded.
The selected camera number is displayed on the
upper left of the menu.
2
Press [CARD->CAM] to set it in inverse video.
13
Ref. Transfer
CAM-> CARD-> CARD->
CARD CAM
Date
95/07/05
Load OK ?
CAM
The message "Load OK?" appears to confirm the
operation.
3
Press [Enter] (To cancel, press [CARD->CAM]
now in inverse video).
When you press [Enter], transfer of the reference
file from the card to the specified camera begins.
During transfer, the message "Now loading" is
displayed.
When the loading is completed
The message "Completed" is displayed, and the
previous display is resumed.
If the loading fails, an error message is displayed.
4
Execute the auto level setup on the camera.
Exit
CAM->
CAMs CAMs
Time
12:12
BV9x
Enter
CARD
5-29
Chapter 5 File Operations