Removing the camera from the tripod adaptor
Hold down the red button and pull the lever in the
direction of the arrow.
Red button
If the pin of the tripod adaptor dose not return
to its original position
After removing the camera, if the pin of the tripod
adaptor does not return to its original position, hold
down the red button and move the lever in the
direction of the arrow to return the pin to its original
position. It is not possible to mount a camera with the
pin left out.
Original position
Pin
Lever
Using the chest pad
Pull out the small pad on the BVP-950/950P that can
be used as the chest pad.
Chest pad
Caution
Do not put the camera with the chest pad pulled out, or
mounted it to the tripod. The chest pad may be
damaged.
2-15
Chapter 2 Setup