Setting The Master/Slave Units - Sony BVP-900 Series System Manual

4-2 Preparations for Adjustments

4-2-4 Setting the Master/Slave Units

Specify the master/slave units before executing
"4-6-3 Adjusting the White Balance," and you can
To make the settings from the MSU-700A/750
Proceed as follows.
1
Press the MULTI button of the menu operation
block.
The Multi-Control Menu appears on the display.
2
Press [Master/Slave].
The Master/Slave setting display now appears.
3
Designate the master unit.
1) Press [Master] to set it to inverse video.
2) Press the number of the camera to be the master
unit (for which you will adjust the white
balance) to set it to inverse video.
Cameras 1 through 12 can be selected when the
EXPAND button of the camera select block is
dark. To select cameras 13 through 24, press and
light the button.
4
Designate the slave units.
1) Press [Slave] to set it to inverse video.
2) Press the number of the cameras to be the slave
units (for which the white balance is to be
adjusted in reference to the adjustment for the
master unit) to set them in a dotted background.
Cameras 1 through 12 can be selected when the
EXPAND button of the camera select block is
dark. To select cameras 13 through 24, press and
light the button.
To specify all the camera for slave units, press
[All slave].
To cancel all the camera's master/slave unit
designation, press [All off].
4-26
Chapter 4 Adjustments
set the white balance of multiple slave-designated
cameras from the master-designated camera.
Multi-Control Menu
MODE
Multi-Control Menu
Master Chara-
/ Slave cter
1
MULTI
CARD
CONFIG
MAINTENANCE
FILE
PAINT
Master/Slave setting display
Master / Slave
Master Slave
1 2 3
7 8 9
(Example: Camera 3 is designated as the master unit.)
Master / Slave
Master Slave
1 1 2 3
7 8 9
(Example: Cameras 1 and 4 through 6 are
designated as the slave units.)
2
Example:
MSU-700A
Press to return to
Multi-Control Menu
Exit
All
All off
slave
4 5 6
10 11 12
Exit
All
All off
slave
4 5 5 6 6
10 11 12