Sony BVP-900 Series System Manual page 327

6-1 Display on the Viewfinder Screen of the BVP-900/900P
VF Setup 2 display
A menu for setting the marks displayed on the
viewfinder screen ON or OFF is displayed.
* VF S e t u p 2 *
→
Ce n e t r Mar e k r H
Ce n e t r Mar e k r
Sa e f t y Z o ne LVL
P i nP Mode
VF D L T Peak n i g
Zo om I nd i c t a o r
1 Adjusting the horizontal position of the center
marker
2 Adjusting the vertical position of the center marker
3 Selecting the size of the safety zone
4 Selecting the picture-in-picture mode
5 Compensating the peaking of a picture on the
viewfinder screen ON or OFF
6 Displaying the zoom indicator
Setting the items
1
Turn the MENU SELECT knob to move the arrow
to the desired item.
2
Flip the MENU SELECT switch to ENTER to
chage the setting.
Adjusting the horizonta/vertical position of the
center marker
Every time you push the MENU SELECT switch to
the ENTER position, LOCK or ADJ is displayed
alternately.
The adjusted value is stored in a lens file.
LOCK: The center marker position is locked, and the
position cannot be changed.
ADJ: The horizontal and vertical positions of the
center marker are adjusted with the MENU
SELECT knob.
6-4
Chapter 6 Display
1
: L OCK
2
V : L OCK
3
: 9 0%
4
:
5
: O FF
6
: O FF
Selecting a picture-in-picture mode
You can change the picture-in-picture mode: Mode 1,
Mode 2, and Mode 3.
Mode 1: The viewfinder screen is always in picture-
in-picture mode. On the main screen, a camera
picture appears, and on the sub-screen, a return
video signal appears. When the RET1 or RET
button is pressed, a return video picture appears on
the main screen, and a camera picture on the sub-
screen.
Mode 2: When the RET1 or RET button is pressed,
the picture-in-picture mode is obtained, and a
return video picture appears on the main screen,
and a camera picture on the sub-screen.
Mode 3: When the RET1 or RET button is pressed,
the picture-in-picture mode is obtained, and a
camera picture appears on the main screen, and a
return video picture on the sub-screen.
Setting the peaking of the detail compensation
on the viewfinder screen ON/OFF
ON: The peaking of the detail compensation does not
link with the VF DETAIL switch setting.
OFF: The peaking is turned OFF on the detail
compensation.
Displaying the zoom indicator
OFF: A zoom indicator is not displayed.
A: While zooming up, the white line appears from left
to right at the top on the viewfinder screen.
B: While zooming up, the white line appears from the
center to the left and right at the top on the
viewfinder screen.
A
Zoom Indicator
Turning the Operation Menu OFF
Set the DISPLAY switch on the rear of the BVP-900/
900P to OFF.
B
Zoom Indicator