Sony BVP-900 Series System Manual page 257

4-11 Skin Detail Adjustments
To adjust from the MSU-700A/750
Proceed as follows.
1
Press and light the PAINT button.
Paint menu 1/3 appears on the display.
2
Press [Skin Detail] to set it to inverse video.
The lower half of the display becomes the Skin
Detail adjustment display.
3
Press [1], [2] or [3] to select the channel to be
adjusted.
4
Adjust the Level, Phase, Width and Saturation with
the four control knobs, respectively.
To turn on/off the skin detail function on the
display
Press [Skin Detail], which operates in synchronization
with the SKIN DETAIL button on the MSU-700A.
To turn on/off the skin detail function for
channel 2 or 3
Press [2] or [3] to select the channel, then press
[Skin Dtl2] or [Skin Dtl3].
You cannot turn off the skin detail function for channel 1.
To turn on/off the skin detail gate function on
the display
Press [Gate 1] ([Gate 2], [Gate 3]). The skin detail gate
function can be turned on and off independently for
each channel. By turning this function on for any
channel on the display, the DETAIL GATE button of
the MSU-700A, if unlit, lights in synchronization.
4-78
Chapter 4 Adjustments
Paint menu 1/3
MODE
Clear
V Mod Skin SAT/
Detail
Saw Detail Contrast
Gamma
Black White Flare
/Knee
MULTI
CARD
CONFIG
MAINTENANCE
FILE
PAINT
PAINT button
Paint menu 1/3 and Skin Detail adjustment display
Clear
V Mod Skin SAT /
Detail
Saw Detail Contrast
Gamma
Black White Flare
/ Knee
Spread
Skin Detail 1
Gate
1 2 3
1
Level Phase Width
Home
1
3
Example: MSU-700A
Home
1
3
Auto
Hue 1
Skin Skin
Dtl 1 Detail
Saturation