Sony BVP-900 Series System Manual page 47

2-1 Mounting the Video Camera
Attaching the CA-530/550/550P/570/570P
Camera Adaptor
When you attach the CA-530/550/550P/570/570P
Camera Adaptor to the BVP-950/950P, a portable
VTR, camera control unit or AC adaptor can be
connected to the camera.
Proceed as follow:
1
Turn the LOCK screw on the camera counterclock-
wise until it skids to release the lock.
4 L O C K
2
Attach the CA-530/550/550P/570/570P to the back
of the camera.
Hook the upper part then push the lower part
securely. Check that the adaptor is securely fixed
to the camera by moving the adaptor.
3
Tighten the LOCK screw with a screwdriver.
4 L O C K
Removing a camera adaptor
Turn the LOCK screw counterclockwise until it idles
and then remove the camera adaptor while pushing the
screw.
2-12
Chapter 2 Setup
S
100 0
Pow er HAD
Attaching a shoulder strap
Attach a shoulder strap to the camera to which the
adaptor has been mounted as shown below:
To attach
Clip
To detach
Presss here
to release.
Shoulder strap post
S
Pull up on the
strap to lock it.