Auto Setup; Black Auto Setup - Sony BVP-900 Series System Manual

4-19 Auto Setup

The following six types of Auto Setup are possible:
• Black (black balance and black set)
• White balance
• Level (master black, RGB black level, RGB gain,
black shading, white shading, black set, etc.)
• Hue (skin detail hue channels 1 to 3, and skin tone
iris)
• White shading
• Black shading
Button operations in the AUTO SETUP block of
the MSU-700A/750 and the RCP-720/721/730/731/
740/741 enable four types of Auto Setup, Black (black
balance and black set), White balance, Level, and Skin
detail hue.
The operating procedure is the same for the MSU-
700A/750 and the RCP-720/721/730/731/740/741.
Button operations in the AUTO SETUP block of
the RCP-700/701 enable two types of Auto Setup,
Black (black balance and black set) and White balance.
The operating procedure is the same as the MSU-
700A/750 and the RCP-720/721/730/731/740/741.
Menu operations on the MSU-700A/750 enable all
the six types of Auto Setup.
Auto Setup uses the settings specified in the reference-
file data stored in the video camera. If there is no
reference file stored in the camera, the factory-set
standard values are used.
For the reference file, see "Chapter 5 File Operations."
Auto Setup indication by the MULTI indicators
The MULTI indicators of the MSU-700A/750
normally light in green or orange to indicate the
master/slave designation status of the respective
cameras. They light in red when the auto setup is
executed for the respective cameras.
They flash in red if Auto Setup is interrupted or any
error occurs during Auto Setup.

4-19-1 Black Auto Setup

The black balance and black set are automatically
adjusted.
To execute from the button on the MSU-
700A/750 or RCP-700-series panels
Example: AUTO SETUP block
AUTO SETUP
SKIN DTL LEVEL
AUTO HUE
To start Black Auto Setup
Press and light the BLACK button.
To cancel Black Auto Setup
Press the lit BLACK button.
Black Auto Setup is canceled, the button flashes, and
the original status is retrieved. When you press the
button again, it goes dark.
On the MSU-700A/750, RCP-720/721/730/731/740/
741, you can cancel Black Auto Setup by pressing the
START/BREAK button.
When the black auto setup is completed
The BLACK button goes dark.
On the RCP-720/721/740/741, the adjustment mode of
the white balance/black balance control block is
automatically set to Relative mode.
To execute from the menu operation block
of the MSU-700A/750
Press [ABB] of the Black adjustment display (page
4-38).
You can also execute Black Auto Setup using the Auto
Setup menu.
For the Auto Setup menu, see "4-19-7 Auto Setup With the
Auto Setup Menu."
START/
BREAK WHITE BLACK
BLACK button
4-97
Chapter 4 Adjustments