Sony BVP-900 Series System Manual page 177

3-4 Initial Settings for the Control System
To adjust the brightness of the LEDs
You can adjust the brightness of the LEDs of the panel
buttons and camera number/tally indication window.
To adjust the brightness, proceed as follows.
1
Press [MSU Adjusting] on the MSU Configuration
menu to display the MSU adjustment menu.
2
Press [LED Bright] to set it to inverse video.
The lower half of the display becomes the LED
Brightness adjustment display.
Clear
LED
Buzzer
EL Bright
Bright
LED Brightness
Switch Tally
72 78
3
Adjust the brightness with the three control knobs.
Switch: Brightness of the built-in LEDs of the
control buttons
Tally: Brightness of the built-in LEDs of the
camera number/tally indication window
Other LED: Brightness of the other LED
indicator, such as those of the camera select
block and the ACCESS indicator
The master brightness can be adjusted with the
rightmost control knob.
When the adjustment is completed
Press [Home] to return to the MSU adjustment menu,
and press [Exit] to release the menu operation.
3-96
Chapter 3 Initial Settings
Home
1
1
LED Disp
Bright
Other LED Master
93 78
To adjust the brightness of the EL display
You can adjust the brightness of the display of the
menu control block.
To adjust the brightness, proceed as follows.
1
Press [MSU Adjusting] on the MSU Configuration
menu to display the MSU Adjustment menu.
2
Press [EL Bright] to set it to inverse video.
The lower half of the display becomes the EL
Display adjustment display.
Clear
LED
Buzzer
EL Bright
Bright
EL Display Brightness
Level
50
3
Adjust the brightness with the leftmost control
knob.
When the adjustment is completed
Press [Home] to return to the MSU adjustment menu,
and press [Exit] to leave this menu.
Home
1
1
LED Disp
Bright