Internal Boards Of The Ca-570/570P - Sony BVP-900 Series System Manual
Video camera system
Hide thumbs
Also See for BVP-900 Series:
- Product information manual (140 pages) ,
- Maintenance manual (520 pages) ,
- Operation manual (48 pages)
Table of Contents
Advertisement
3-1 Internal Boards
3-1-5 Internal Boards of the CA-570/570P
The internal boards of the CA-570/570P on which
switches and controls used for system setup are
provided, are introduced here.
MD board
AU-251 board
AU-237 board
Detaching an internal board
Loosen the four screws on each side panel, and remove
the side panels. Then pull out an internal board with
the black knob.
See "3-1-2 Internal Boards of the BVP-950/950P."
MD board
MD
PROMPTER
1 PROMPTER/GENLOCK switch
GENLOCK
1 PROMPTER/GENLOCK (prompter signal
input/output/external sync signal input) switch
Selects the function of the PROMPTER/GENLOCK
connector.
3-12
Chapter 3 Initial Settings
MD
TR
AU
AU
MB-783 board
PROMPTER: Inputs or outputs a prompter video
signal.
GENLOCK: Inputs an external sync signal.
Factory Setting: PROMPTER
AU-251 board
4
3
2
A
S600
S800
S351
B
C
S700
D
S200
E
S100
F
1S600 switch
Selects an input signal sent to the CCU as a
microphone 1 signal.
CHU: A signal input to the MIC connector on the
camera
CA: A signal input to the MIC 1 connector on the CA-
570/570P
Factory Setting: CA
DM-116 board
1
1 S600 switch
2 S351 switch
3 S800 switch
4 S700 switch
5 S200 switch
6 S100 switch
Advertisement
Table of Contents
