Sony BVP-900 Series System Manual page 54

Preparations for attaching the camera
1
If the BKP-9057 viewfinder saddle is attached to
the CA-905F/905K, turn the saddle lock knob
counterclockwise to loosen it, then tilt the saddle
backward.
Saddle lock knob
2
Remove the 1.5-inch viewfinder from the camera.
Push the viewfinder slide inward.
3
Turn the lens locking lever upward and remove the
lens mount cap.
Aligning the camera mount
After you have aligned the camera mount once, you
need not align it again if the same camera model is
used.
Release lever
Slide lever
1
Slide the slide lever to LOCK.
VF connector
2
Insert the V-wedge shoe on the base of the camera
into the V-shaped groove on the camera mount,
and slide the camera foward until it clicks in place.
Lens locking lever
Camera mount
Lens mount cap
3
If you do not use the BKP-9057, attach the BVF-
55/55CE to the camera.
Height-adjusting
knobs
Camera
(Continued)
2-19
Chapter 2 Setup