Sony BVP-900 Series System Manual page 352

Page 4 (System <1-12>)
The connection status of all units connected to the
CNU-700 with the BKP-7930 installed is displayed.
This page appears only when the CNU-700 is used.
CONTROL SYSTEM
CAM 1
CCU
1
CCU
2
CCU
3
CCU
4
CCU
5
CCU
6
CCU
7
CCU
8
CCU
9
CCU
10
CCU
11
CCU
12
RCP RCP RCP RCP RCP RCP
CNU group 1 2 3 4 5
No. xx
Group number set with the
CNU GROUP No. switches on
the CNU-700 and BKP-7930.
Page 4
RCP RCP RCP RCP RCP RCP
6 7 8 9 10 11 12
MSU2
MSU1 VCS VCS
1 2
Contents of auto setup
On pages 5 and 6, the contents of auto setup of the
camera appear.
To display pages 5 or 6, press either [Auto<1-6>] (page
5) or [Auto<7-12>] (page 6) on the CNU Character
display to set it in inverse video.
The page corresponding to the pressed item appears.
CNU Character
System
System
Default
<1- 6> <7-12>
Auto Diag
<7-12>
<7-12> <1- 6>
Data One
Cam
Auto Setup <1- 6 Cam>
Chara-
cter on
Page 5 (Auto <1-6>)
The contents of auto setup of the cameras numbered 1
through 6 appear. Each row from top to bottom
corresponds to cameras 1 through 6.
Execution status of auto setup
Item of auto setup
When a camera is connected to the CNU-700/500, the
number of the CCU 1 through 6 connectors to which the
camera is connected is displayed. If some trouble is
detected during self-diagnosis, this blinks.
AUTO SETUP
1CAM
Auto Black Balance
< START >
Page 6 (Auto <7-12>)
The contents of auto setup of the cameras numbered 7
through 12 appear, in the same manner as with page 5.
This page appears only when the CNU-700 is used.
Exit
System Auto
<1-12> <1- 6>
Data
Diag Diag One
Cam <1-12>
Page 5
6-29
Chapter 6 Display