Adjusting The V Modulation Compensation - Sony BVP-900 Series System Manual

4-6-4 Adjusting the V Modulation Compensation

Adjust the V modulation shading.
Use the menu operation block of the MSU-700A/750
for the adjustment and proceed as follows.
1
Press and light the PAINT button.
Paint menu 1/3 appears on the display.
2
Press [V Mod Saw] to set it to inverse video.
The lower half of the display becomes the V Mod
Saw adjustment display.
3
Adjust the V modulation shading with the control
knobs.
To independently adjust R, G, and B: Use the
left three control knobs.
To adjust R, G, and B in combination: Use the
right-most (Master) control knob.
To turn off the V modulation shading
Press [V Mod Saw Off] to set it to inverse video.
The V modulation shading is turned off to permit a
comparison with the V modulation shading ON status.
Paint menu 1/3
MODE
Clear
V Mod Skin SAT/
Detail
Saw Detail Contrast
Gamma
Black White Flare
/Knee
MULTI
CARD
CONFIG
MAINTENANCE
FILE
PAINT
PAINT button
Clear
Skin
V Mod
Detail
Detail Contrast
Saw
Gamma
Black White Flare
Spread
V Mod Saw
R G B
-10 0 0
Chapter 4 Adjustments
Home
1
3
Example: MSU-700A
Home
SAT/
1
3
/Knee
V Mod
Saw Off
Master
0
4-51