Sony BVP-900 Series System Manual page 298

3
Turn the MIC1 LEVEL control to move the cursor
to the "Select Lens" line, then press the control.
4
Turn the MIC 1 LEVEL control to select the file
corresponding to the lens to be used.
5
When the desired file number is displayed, press
the MIC 1 LEVEL control.
To operate from the MSU-700A/750
Preparation
Specify the number of the camera to be adjusted, with
the camera select button.
Operating procedure
1
Press the FILE button of the menu operation block.
The File Control Menu appears on the display.
2
Press [Lens File] of the File Control Menu.
The Lens File operation menu appears.
3
Press [Lens Select].
The Lens File Selection display now appears.
6
Press the ENTER/CANCEL switch downward to
CANCEL to return to the Operation menu.
To release the Operation menu
Return the DISPLAY switch to OFF.
File Control Menu
MODE
File Control Menu
Refer- Scene
ence File
MULTI
CARD
CONFIG
MAINTENANCE
1
FILE
PAINT
Lens File operation menu
Lens File
Lens Lens
Store Select
Auto
White
Lens File OHB File
2
Example: MSU-700A
Exit
Adjusting
(Continued)
5-13
Chapter 5 File Operations