Sony BVP-900 Series System Manual page 351

6-4 Character Display of the CNU-700/500
Setting status of the control system
On pages 2 through 4, how the BVP-900/900P/950/
950P camera, CCU-700A/700AP/550A/550AP, RCP-
700-series unit, MSU-700A/750 and VCS-700 are
connected to the CNU-700/500 is displayed.
To display pages 2 through 4, press [System<1-6>]
(page 2), [System<7-12>] (page 3) or
[System<1-12>] (page 4) on the CNU Character
display to set it in inverse video.
The page corresponding to the pressed item appears.
CNU Character
System System
Default
<1- 6> <7-12>
Auto Diag
<7-12> <1- 6> <7-12>
Data One
Cam
Control System <1- 6 Cam>
Chara-
cter on
6-28
Chapter 6 Display
Exit
System Auto
<1-12> <1- 6>
Diag Diag One Data
Cam <1-12>
Page 2 (System<1-6>)
This symbol appears where a camera is connected to one of the
CCU 1 through 6 connectors. If some trouble is detected during
self-diagnosis, the camera number blinks.
The camera is selected with the camera
select buttons on the MSU-700A/750, and
can be controlled with the MSU-700A/750
and RCP-700-series unit. However,
PANEL ACTIVE is OFF.
The camera is selected with the camera
select buttons on the MSU-700A/750, and
can be controlled with the MSU-700A/750
and RCP-700-series units, and PANEL
ACTIVE is ON.
The camera is not selected with the
camera select buttons on the MSU-700A/
750. However, PANEL ACTIVE is ON.
The camera cannot be controlled with the
MSU-700A/750 or RCP-700-series unit.
CONTROL SYSTEM
CCU
CAM 1
1
CCU
2
CCU
3
CCU
4
CCU
5
CCU
6
RCP RCP RCP
CNU group No. x
1 2 3
This symbol appears when
the RCP-740/741, etc. is
connected to one of the RCP
1 through 6 connectors.
This symbol appears when the
RCP-700/701 is connected to
the RCP-740/741, etc.
Group number set with the
CNU GROUP No. switch
Page 3 (System<7-12>)
The connection status of the units connected to the
BKP-7930 installed in the CNU-700, in the same
manner as with page 2.
This page appears only when the CNU-700 is used.
Page 2
RCP RCP RCP
4 5 6
MSU1 VCS1
This symbol
appears when
the VCS-700 is
connected to
the VCS
connector.
This symbol appears when
the MSU-700A/750 is
connected to the MSU
connector.