Sony BVP-900 Series System Manual page 200

Panel lock mode
When the LOCK button is pressed on the RCP-720/
721/730/731/740/741, all the control functions other
than the iris/master black adjustments become
inoperative.
To activate all the functions, press the LOCK button
again so that it goes dark.
Example:
LOCK button
LOCK
PARA MASTER SLAVE
To set the priority only for the iris/master
black controls
When you press and light the IRIS/MB ACTIVE
button on the panel on which the PANEL ACTIVE
button is not lit, the priority only for the iris/master
black adjustments will be obtained.
When the MSU-700A/750 is in the panel active status,
you can set only the iris and master black controls
inoperative on the MSU-700A/750 by pressing the lit
IRIS/MB ACTIVE button so that it goes dark.
RCP-740/741
CAM PW VF PW TEST1 TEST2 BARS
To control the camera from both the MSU
and RCP-series panel (Parallel mode)
The MSU-700A/750 and RCP-720/721/730/731/740/
741 panels have the PARA button to select Parallel
mode. When you press and light the PARA button of
the unit that does not have the control priority (the
PANEL ACTIVE button is not lit), Parallel mode is
activated and all the control functions other than the
iris/master black controls become operative from both
units.
Examples:
PARA button
MSU-700A
WAVEFORM MONITOR
PARA
MULTI
TALLY
PANEL
ACTIVE
1 2
EXPAND
RCP-740
PARA button
RCP-741
LOCK
PARA MASTER SLAVE
• Adjustments in Parallel mode are performed in
Relative mode.
• When you activate Parallel mode on the MSU-700A/
750, first select the camera to be controlled at the
camera select block then press the PARA button.
To cancel Parallel mode
You can cancel Parallel mode by pressing the PARA
button of the MSU-700A/750 or RCP-700-series
panel.
CC
3 4 5 6 7 8 9 10 11 12
CAM PW VF PW TEST1 TEST2 BARS
4-21
Chapter 4 Adjustments