Sony BVP-900 Series System Manual page 337

6-3 Display on the Viewfinder Screen of the BVP-950/950P Mounted on the CA-905F/905K
VF Setup 3 display
A menu for setting the marks displayed on the
viewfinder screen ON or OFF is displayed.
* VF S e t u
→
VF Y F i x
P i nP M od e
P i nP D SP M o de
1 Setting the Y fixing on the viewfinder ON or OFF
2 Selecting the picture-in-picture mode
3 Selecting the priority of the picture-in-picture mode
and the marker display
Setting the items
Set the items with the same method as for the VF
Setup 2 display.
Setting the Y fixing on the viewfinder ON or
OFF
When the BVF-55/55CE is used: Set to OFF.
The video signal select buttons on the rear of the
CA-905F/905K switch the picture on the
viewfinder. If no button is pressed, the Y signal is
output. If one of the R, G, and B buttons is
pressed, the signal corresponding to the pressed
button is output. If two or three of the R, G, and B
buttons are pressed, the signal corresponding to the
leftmost button of the pressed buttons is output.
When the BVF-77/77CE/7700/7700P is used (use of
the BKP-9057): Set to ON.
The video signal select buttons on the rear of the
CA-905F/905K switch the picture on the
viewfinder. If no button is pressed, the Y signal
(for the BVF-77/77CE) or the color signal (for the
BVF-7700/7700P) is output. If one of the R, G,
and B buttons is pressed, the signal corresponding
to the pressed button is output. If two of the R, G,
and B buttons are pressed, the mixed signal of the
pressed buttons is output. If the R, G, and B
buttons are all pressed, the Y signal is output.
6-14
Chapter 6 Display
p 3 *
1
: O FF
2
1 :
3
: N ORM
Selecting a picture-in-picture mode
You can change the picture-in-picture mode: Mode 1,
Mode 2, or Mode 3.
Mode 1: The viewfinder screen is always in picture-
in-picture mode. On the main screen, a picture
from a camera appears, and on the subscreen, a
return video signal appears. If the RET1 or RET
button is pressed, a return video picture appears on
the main screen and a picture from a camera on the
subscreen.
Mode 2: If the RET1 or RET button is pressed, the
picture-in-picture mode is obtained, and a return
video picture appears on the main screen and a
picture from a camera on the subscreen.
Mode 3: If the RET1 or RET button is pressed, the
picture-in-picture mode is obtained, and a picture
from a camera appears on the main screen and a
return video picture on the subscreen.
Note
If the BKP-9057 is not attached, the picture-in-picture
function does not work.
Selecting the priority of the picture-in-picture
mode and the marker display
NORM: The marker and character display and the
picture-in-picture mode are obtained
simultaneously. If the return video signal is not
synchronized with the video signal, the picture on
the subscreen may be unstable.
PinP: Picture-in-picture mode has priority.
If the PinP switch is set to ON, markers and
characters disappear even if the CENTER
MARKER, SAFETY ZONE, CURSOR 1 to 3,
CURSOR ON, or DISPLAY switch is set to ON.
When the PinP switch is set to OFF, markers and
characters are displayed according to the settings
of the switches.
DSP: Display mode has priority.
If the CENTER MARKER, SAFETY ZONE,
CURSOR 1 to 3, CURSOR ON, or DISPLAY
switch is set to ON, picture-in-picture mode is
canceled, and the selected marker or character is
displayed even if the PinP switch is set to ON.
If all of the CENTER MARKER, SAFETY ZONE,
CURSOR 1 to 3, CURSOR ON, and DISPLAY
switches are set to OFF, the picture-in-picture
mode is obtained, and a sub-creen appears.
Note
If the BKP-9057 is not attached, the picture-in-picture
function does not work.