Sony BVP-900 Series System Manual page 245

4-9 Knee Adjustments
5
Press [Knee Slope] of Paint menu 2/3 to set it to
inverse video.
The lower half of the display becomes the Knee
Slope adjustment display.
6
Adjust the knee slope.
To independently adjust R, G, and B: Use the
left three control knobs.
To adjust R, G, and B in combination: Use the
right-most (Master) control knob (master knee
point adjustment).
Knee adjustments on the Gamma/Knee
adjustment display
The master knee point/knee slope adjustments and
knee/auto knee on/off operations can also be made on
the Gamma/Knee adjustment display.
The Gamma/Knee adjustment display appears when
you press [Gamma/Knee] of Paint menu 1/3 to set it to
inverse video.
Paint menu 1/3 and Gamma/Knee adjustment display
Clear
V Mod Skin
Detail
Saw Detail
Black White Flare
Spread
Gamma / Knee
Gamma Black
Off Gamma
Gamma Blk Gamma
-28 6
Adjust the master knee point and master knee slope
with the right two control knobs.
Turn on/off the knee/auto knee by pressing [Knee Off]
or [Auto Knee], respectively.
4-66
Chapter 4 Adjustments
Home
SAT/
Contrast
1
3
Gamma
/Knee
Auto
Knee Off
Knee
Knee Point Knee Slope
-21 10
Paint menu 2/3 and Knee Slope adjustment display
Clear
Knee Knee
Knee Sat
Point Slope
Black
Gamma
Gamma
Spread
Knee Slope
R G
0 0
To adjust from the RCP-720/721/740/741
Proceed as follows.
KNEE POINT KNEE SLOPE
SATURATION CONTRAST
SKIN DETAIL SKIN PHASE SKIN WIDTH
R GAMMA M GAMMA
R FLARE G FLARE
DTL LEVEL DTL LIMITER BLK LIMITER
2
1
When using the RCP-740/741, press 4 or $ to
light the indicators of the uppermost line.
When using the RCP-720/721, press 4 to light the
indicators of the middle line.
2
Adjust the knee with the left two controls.
KNEE POINT: Master knee point
KNEE SLOPE: Master knee slope
The LED level markers around the controls light to
indicate the adjusted volume.
Home
White Clip
2
3
Auto
Knee
Auto
Knee Off
Knee
B Master
0 0
CLEAR
SKIN SAT
B GAMMA BLK GAMMA
1
B FRARE
DTL CRISP
PAINT
LOCK
Example: RCP-740/741