Menu Selection - Sony BVP-900 Series System Manual
Video camera system
Hide thumbs
Also See for BVP-900 Series:
- Product information manual (140 pages) ,
- Maintenance manual (520 pages) ,
- Operation manual (48 pages)
Table of Contents
Advertisement
7-3-4 Menu Selection
Select adjustment menus from the Maintenance or
Operation menu.
For menu operations, use the DISPLAY switch, MIC 1
LEVEL control and ENTER/CANCEL switch.
Note
When the camera is installed in the CA-905F/905K,
use the rear control panel of the CA-905F/905K and
operate in the same manner as described in "7-2
Adjustments on the BVP-900/900P."
BVP-950/950P side panel
MIC 1 LEVEL control
Inside the switch box
MENU SELECT switch
DISPLAY switch
To display the Operation menu
Set the DISPLAY switch to MENU.
The Operation menu appears in the viewfinder.
Operation menu
* Operation menu *
Diagnose
Setup 1
Setup 2
Setup 3
950 Setup
Skin Tone Setup
Painting
File control
Shutter Setup
menu sel --> enter
Setup 3, Skin Tone Setup, Painting, File Control
Shutter Setup provide menus for stand-alone operation.
The latter three menus are not available when the
CCU-700A/700AP/550A/550AP is connected, or the
RM-B150, RCP-700-series panel or MSU-700A/750 is
connected to the REMOTE connector of the camera.
VTR
GAIN
OUTPUT AUTO
WHITE
KNEE
STBY
CAM
L
ON
B
M
A
H
PRE
SAVE
BARS
OFF
SET
DISPLAY TESTOUT
ENTER
ON
ENC
OFF
RGB
SEL
CANCEL
MENU
SEL
To select a menu
Turn the MIC 1 LEVEL control to set the cursor to the
line of the desired menu, then press the ENTER/
CANCEL switch upward to ENTER.
To release the Operation menu
Return the DISPLAY switch to OFF.
To display the Maintenance menu
While holding the ENTER/CANCEL switch upward to
ENTER, set the DISPLAY switch to MENU.
The Maintenance menu appears in the viewfinder.
Maintenance menu
* Maintenance Menu *
System Setup
Reference Store
Lens File Store
OHB File Store
Auto Iris Setup
RPN Correct
29F040-BVP-900 X.XX
menu sel --> enter
For Reference Store, Lens File Store, and OHB File Store,
see Chapter 5 "File Operations."
To select a menu
Turn the MIC 1 LEVEL control to set the cursor to the
line of the desired menu, then press the control.
To release the Maintenance menu
Return the DISPLAY switch to OFF.
Chapter 7 Stand-Alone Operations of Cameras, etc.
7-11
Advertisement
Table of Contents
