6-2 Display on the Viewfinder Screen of the BVP-950/950P
6-2-1 Mark Display
On a viewfinder screen, several marks, such as a center
marker or safety zone, can be displayed. You can
select whether to display the marks or not on the VF
Setup 2 display.
For details, see "6-2-3 Operation Menu."
Center marker
White cross hairs, which indicate the center of the
viewfinder, appears on the viewfinder screen.
Turning the display ON or OFF and adjusting the
position of the center marker are set on the VF Setup 2
display. The adjusted position is stored in the lens file.
For details, see "6-2-3 Operation Menu."
Center marker
Safety zone
A frame (safety zone) to indicate 90% of the picture
being shot with the camera appears on the viewfinder
screen.
You can change the frame size to 80% or turn off the
frame on the VF Setup 2 display.
For details, see "6-2-3 Operation Menu."
Safety zone
6-6
Chapter 6 Display
Zoom Indicator
A zoom indicator to show the zoom position appears
on the viewfinder screen. Two types of indicator are
available, and you can select the type on the VF Setup
2 display.
Note
If the BVF-10W/10WCE is used, a zoom indicator
does not appear.
For details, see "6-2-3 Operation Menu."
A
Zoom indicator
B
Zoom indicator