Allen-Bradley Powermonitor 3000 User Manual page 97

Allen-Bradley HMIs
Please give particular attention to the messaging and
IMPORTANT
software version compatibility information in the
table. If you are replacing a Series A Ethernet
Powermonitor 3000 with a Series B unit, you may
need to upgrade software or modify the
communications programming of your controller
ladder programming or client application to
re-establish communications.
Table 4.10 Series A and Series B Comparison
Function
Communications protocol
Protocol select
Bootp support
Data rate
Web page
Flash upgradeable
LED indicators
Network Demand Synch
SNTP capable
I/O Communications
CIP Generic messaging
PLC-5 Typed CIP messaging
CIP Data Table messaging
SLC 500 Typed CIP messaging
RSPower32 support
RSEnergyMetrix support
RSEnergy support
The Powermonitor 3000 supports the following network requests:
Series A (Comms FRN
2.01 or 2.02)
CSP (PCCC) and/or
EtherNet/IP
Yes
Yes
10 Mbps
Fixed web page
Uses special loader
Link, RX, TX
No
No
No
Yes
Yes
Yes
Yes
2.10 and later
Yes
2.00.13 (CSP only)
Publication 1404-UM001D-EN-E - October 2004
Communications 4-37
Series B
EtherNet/IP only
Encapsulated PCCC
(Comms FRN 1.22 or later)
N/A
No
10/100 Mbps
Configurable web page
Uses ControlFlash
LNK, ACT, STATUS`
Yes
Yes
Yes
Yes
Yes
Yes, Comms FRN 1.21 or
later
Yes, Comms FRN 1.21 or
later
2.40 and later
Yes
No, upgrade to
RSEnergyMetrix