Allen-Bradley Powermonitor 3000 User Manual page 182

A-8 Powermonitor 3000 Data Tables
Table A.5 Date and Time
CSP File No. N11
Remote I/O BT 12
CIP Assy. Inst. 6 (Write), 7 (Read)
No. of Elements 8
User Configurable No
Data Type Integer
Data Access Read / Write
PM3000 Type All
Element Modbus Element name
No. Address
0 40101 Password
1 40102 Date: year
2 40103 Date: month
3 40104 Date: day
4 40105 Time: hour
5 40106 Time: minute
6 40107 Time: seconds
7 40108 Time: hundredths of seconds
(1) On a write, the maximum value for "day" depends on the values written to "month" and the "year".
(2) The data and time default values are set if one of the following three conditions occur:
- When the device is first powered-up at the factory
- A device power-up following the depletion of the real-time clock power source
- In the event of an abnormal condition which may cause the real-time clock to contain values which are not in the valid range
The date and time are not set to the default values when "Restore Factory Defaults" is performed via the Display Module or communications port.
Publication 1404-UM001D-EN-E - October 2004
Range Default Comment
(2)
Value
0 to 9999 0 Valid password required to change the date & time.
Returns -1
1998 to 1998 1 = January, 2 = February,...12 = December
2097 The internal clock adjusts the date for leap year.
1 to 12 1
(1) 1
1 to 31
0 to 23 0 0 = 12am, 1 = 1am,...23 = 11pm
The internal clock does not adjust for daylight savings time.
0 to 59 0
0 to 59 0
0 to 99 0