Allen-Bradley Powermonitor 3000 User Manual page 184

A-10 Powermonitor 3000 Data Tables
Element Modbus Element name
No. Address
17 40218 Force relay output
18 40219 Force solid-state KYZ output 0 to 3
19 40220 Default relay state in event
of communications loss
20 40221 Default KYZ state in event
of communications loss
21 40222 DM text scroll rate
22 40223 Energy counter rollover
23 40224 Forced demand sync delay
24 40225 Reserved
25 40226 Reserved
Table A.7 Native Communication Configuration
CSP File No. N13
Remote I/O BT 11
CIP Assy. Inst. 10 (Write), 11 (Read)
No. of Elements 6
User Configurable No
Data Type Integer
Data Access Read / Write
PM3000 Type All
Element Modbus Element name
No. Address
0 40301 Password
1 40302 Protocol
2 40303 Delay
3 40304 Baud rate
Publication 1404-UM001D-EN-E - October 2004
Range Units Default
Value
0 to 3 - 0
- 0
0 to 3 - 0
0 to 1 - 1
4 to 15 Digits 15
0 to 900 Seco 10
nds
0 - 0
0 - 0
Range Units Default
Value
0 to 9999 - 0
0 - 0
0 to 15 5 mS 2
(10mS)
0 to 4 - 3
Comment
0 = No change
1 = Force energize the relay
2 = Force de-energize the relay
3 = Release force of relay output
Overrides setpoint or pulse output control
0 = Last state / resume
1 = Last state / freeze
2 = De-energize / resume
3 = De-energize / freeze
Refer to Communications Loss Behavior on
page 6-4
0 = Slow; 1 = Fast
Refer to Configurable Energy Counter Rollover
on page 3-9
0 = Disable, 1 to 900 = number of seconds delay
Reserved. Must be 0 on a write, returns 0.
Reserved. Must be 0 on a write, returns 0.
Comment
Valid password required to change configuration data.
Returns -1
0 = DF1 half-duplex slave
1 = Modbus RTU slave
2 = Auto Sense - Selects the protocol based on the incoming
communication packets
Specifies the delay before responding to an external request,
useful with slow external devices (such as RF modems).
0 = 1200 baud
1 = 2400 baud
2 = 4800 baud
3 = 9600 baud
4 = 19200 baud