(1) A setpoint activates when the magnitude of any phase passes the activation limit and releases when all phases pass the release limit in the appropriate direction for the
setpoint evaluation condition.
(2) These setpoint types apply only to the applicable Powermonitor 3000 models and will appear as "inactive" on other models.
Publication 1404-UM001D-EN-E - October 2004
M4
M
M5
6
•
• • Refer to Table A.20 Setpoint Output Actions
•
• •
•
• •
•
• •
•
• •
•
• •
•
• •
•
• •
•
• •
•
• •
• • Refer to Sag and Swell on page 8-13
• •
(2)
•
• • Refer to Table A.34 Harmonic Results; THD, Crest Factor, and More .
•
• •
•
• •
•
• •
•
• •
•
• •
M
Comment
8
• Triggers a setpoint when a transient has been detected