Allen-Bradley Powermonitor 3000 User Manual page 334

G-10 Powermonitor 3000 ControlNet Device Profile
Table G.18 Response Parameters
Name
Length
Vendor
Serial Number
Other
CMD
STS
TNSW
EXT_STS
PCCC results
Publication 1404-UM001D-EN-E - October 2004
Table G.17 PCCC Object Request Parameters
Name
TNSW
FNC
PCCC parameters
TIP
The DC will respond to the Execute PCCC service with the following
response parameters, which represent a completely encapsulated
PCCC response:
Data Type
USINT
UINT
UDINT
Product Specific
USINT
USINT
UINT
USINT
Array of USINT
Data Type Parameter
Description
UINT Transport Word
USINT Function Code (Not
used for all Command
Bytes)
Array of USINT CMD/FNC specific
parameters
The Length parameter contains the total length of the
Vendor, Serial Number and Other parameters to
follow. None of these values are actually used by the
PCCC Object, but are instead simply preserved intact
in the associated response.
Parameter Description
Length of Requestor ID
Vendor Number of requester
ASA serial number of requestor
Identifier of user, task, etc. on the
requester
Command Byte
Status Byte
Transport Word
Extended Status: not used for all
CMD's
CMD/FNC specific result data
Semantics of Values
None. Same value must
be returned to requestor.
Refer to PCCC
specification
Refer to PCCC
specification
Semantics of Values
Same value as in request.
Same value as in request.
Same value as in request.
Same value as in request.
Refer to PCCC specification
Refer to PCCC specification
None. Same value as the request
Refer to PCCC specification
Refer to PCCC specification