Allen-Bradley Powermonitor 3000 User Manual page 315

Allen-Bradley HMIs
Class-Specific Service
Table F.18
Service Class/Instance
Code Usage
0x4B Instance
Execute PCCC Service
The Execute PCCC service is sent by a remote application to perform
a PCCC request. The service accepts the following request parameters,
which represent a completely encapsulated PCCC command:
Table F.19 Request Parameters
Name Data Type
Length USINT
Vendor UINT
Serial Number UDINT
Other Product Specific
CMD USINT
STS USINT
TNSW UINT
FNC USINT
PCCC parameters Array of USINT
Powermonitor 3000 EtherNet/IP Device Profile
Service Name
Execute PCCC
Parameter Semantics of Values
Description
Length of Requestor Number of bytes,
ID including Length, Vendor,
Serial Number and other
fields.
Vendor Number of Same as the attribute in
requester the Device Object of the
same name.
ASA serial number of Same as the attribute in
requestor the Device Object of the
same name.
Identifier of user, Product specific
task, etc. on the
requester
Command Byte Refer to PCCC
specification
0 Must be 0 on PCCC
requests
Transport Word None. Same value must
be returned to requestor.
Function Code (Not Refer to PCCC
used for all Command specification
Bytes)
CMD/FNC specific Refer to PCCC
parameters specification
Publication 1404-UM001D-EN-E - October 2004
F-9