Allen-Bradley Powermonitor 3000 User Manual page 198

A-24 Powermonitor 3000 Data Tables
Table A.16 Selftest/Diagnostic Results
CSP File No. N22
Remote I/O BT 36
CIP Assy. Inst. 23
No. of Elements 27
User Configurable No
Data Type Integer
Data Access Read only
PM3000 Type All
Element Modbus Element name
No. Address
0 30601 Bulletin number
1 30602 Series
2 30603 Overall status
3 30604 Data Acquisition status
4 30605 Data FLASH status
5 30606 Real-time clock status
6 30607 RTC NVRAM status
7 30608 Option communications status -
8 30609 Display module status
9 30610 Watchdog status
10 30611 Code FLASH status
11 30612 RAM status
12 30613 Application FRN
13 30614 Boot code FRN
14 30615 ASIC build #
15 30616 Option communications FRN
16 30617 Display module FRN
17 30618 Reserved
Publication 1404-UM001D-EN-E - October 2004
Range Comment
1404
0 to 8 0 = A, 1 = B, etc.
- 0 = OK
- 0 = OK
bit 0 = overall status; 0 = pass, 1 = fail
bit 1 = reserved
bit 2 = data bus connection failure
bit 3 = address test failure
- 0 = OK
- 0 = OK
- 0 = OK
Non-zero indicates corruption of non-volatile memory. This
does not cause product to shutdown. The error is cleared on a
reset/power cycle. If this error is detected, date/time, and
energy values are reset.
0 = OK or no optional communications present
- 0 = OK or no DM connected
- 0 = OK
- 0 = OK
bit 0 = overall status; 0 = pass, 1 = fail
bit 1 = boot code checksum failure
bit 2 = application code checksum failure
bit 3 = calibration CRC failure
bit 4 = no calibration data
bit 5 = wrong application firmware loaded
- 0 = OK
bit 0 = read/write test failure
0 to 9999 100 indicates V1.00, 103 indicates V1.03, etc.
0 to 9999 100 indicates V1.00, 101 indicates V1.01, etc.
0 to 9999 Revision number of the 'code' which was used to fabricate the
ASIC.
0 to 9999 100 indicates V1.00, 103 indicates V1.03, etc. 0 = none (catalog
numbers ending in -000, -232)
0 to 9999 104 indicates V 1.04, 105 indicates V1.05, etc.
Returns 0 if no DM connected
0 Returns 0